How to Build Vegetable Garden Boxes: 12 Steps (with Pictures) (2024)

Explore this Article

Co-authored bySteve Masley

Last Updated: February 6, 2024References

Download Article

1. 1

   Choose a level location that gets good sun during the day. Pick a spot for the raised garden bed that is not shaded and is flat so that the garden will have proper drainage. A standard vegetable garden box is 4ft (1.2m) by 8ft (2.4m), but work with the space you have.^[1]

   • Don’t make your garden box any wider than 4ft (1.2m) or it will be hard to plant and tend to your vegetables in the middle.
   • When in doubt, a North-South orientation is generally a good option for garden beds to ensure they get plenty of sun.
2. 2

   Mark the location of the garden bed with string and pegs. Stick a peg in the ground where each corner of the box will be. Tie string from each peg to the next to mark the sides of the garden box so you know where to prepare the ground.^[2]

   • You can also use a chalk line or spray chalk to mark the outline of the garden bed.

   Advertisem*nt

3. 3

   Clear away weeds and grass from where the garden box will sit. Pull up any weeds from the soil so they don’t grow up into your future garden. Dig up and remove any turf if the area is currently occupied by lawn.^[3]

   • If you have the time, you can place a piece of cardboard or a tarp over the area of lawn for 6 weeks or so to kill the grass and make it easier to remove.

   See Also

   Vegetable Garden Layout Planning | Bonnie PlantsVegetable garden container ideas – 20 ways to grow crops in potsPlan Your Perfect Vegetable Garden LayoutHow to Layout a Vegetable Garden - Smart Garden and Home
4. 4

   Break up and loosen the soil with a pitchfork. Use a pitchfork or garden fork to turn over and mix up the top 6in (15cm) or so of soil underneath where the new garden bed will go. This will help kill any lurking weeds or grass and even out the soil underneath the garden.^[4]

   • Try to mix up the soil as much as you can and spread it out with the tips of the pitchfork or a rake so that the bottom of the bed will be as flat as possible.

Advertisem*nt

Download Article

1. 1

   Lay out your lumber flat on the ground in the shape of the box. Use 2 4ft (1.2m) long and 2 8ft (2.4m) long 2in (5.1cm) by 12in (30cm) pieces of lumber for the sides of a standard 4ft (1.2m) by 8ft (2.4m) garden box. Lay them out flat in the shape of the box with the corners touching.^[5]

   • You can do this either over the prepared site for the box, or off to the side if you have the space. Keep in mind that the frame will be quite heavy after you assemble it.
   • If you are making a garden box of a different size, just adjust the lengths of the lumber for the sides accordingly. 12in (30cm) is the ideal height for raised garden beds so that the plants have plenty of room for their root systems.
   • Use a natural wood that will endure the elements well, like cedar, if you want your garden box to last a long time. If cedar is too expensive, then you can use cheaper pressure-treated lumber that will withstand the elements for many years.

   Warning: Don’t use old railroad ties or any other lumber that has been treated with creosote, which is toxic.

2. 2

   Screw the sides together 1 corner at a time. Pick a corner to start in and turn the pieces of lumber on their sides so they are sitting against each other, with the end of 1 piece square against the inside corner of the other piece. Use a drill to put a 3in (7.6cm) screw every 4in (10cm) through the outside piece into the end of the inside piece to hold them together.^[6]

   • This will be much easier if you have someone helping you to hold the sides in place while you screw them together. If you don’t have a helper, you can screw a piece of scrap lumber diagonally from 1 corner to the other as a brace to hold them in place while you screw them together.
3. 3

   Set the box frame in place over the prepared site. Have someone help you lift and set the garden box frame over the site you cleared. Adjust it so it’s perfectly sitting in the location you want it to be permanently.^[7]

   • If you are working alone, then it’s a good idea to assemble the frame roughly where it will sit so you can just make minor adjustments to get it in position.
4. 4

   Pound 10 wooden or rebar stakes into the ground around the box. Use 2ft (0.61m) long 2in (5.1cm) by 4in (10cm) pieces of wood with the tips cut into points, or 2ft (0.61m) long pieces of rebar. For each side of the box, use a sledgehammer to pound a stake about 12–18in (30–46cm) deep into the ground, 1ft (0.30m) in from each corner. Then, pound in the additional stakes at 2ft (0.61m) intervals. ^[8]

   • Each shorter side will have 2 support stakes and each longer side will have 3, each separated by 2ft (0.61m) of space.
   • Try to get the stakes deep enough into the ground so that the tops don’t stick up above the sides of your raised garden bed. If you are left with any sticking above, then you can cut the tops off using a hacksaw to make them flush with the top of the garden bed.
   • Make sure to place the stakes right up against the outside of the garden box. These support stakes will help hold the box together against the pressure of the expanding soil once you have plants in your garden spreading roots everywhere.
5. 5

   Screw the stakes to the frame if you used wooden ones. Use a drill to insert a 3in (7.6cm) screw through the middle of the wooden stake into the garden box frame. This will help hold the wooden frame in place as your plants grow over the years.^[9]

   • If you used rebar, just make sure it is as flush against the box frame as possible. You don’t need to attach it in any way.

Advertisem*nt

Download Article

1. 1

   Cover the bottom of the bed with a layer of landscape fabric. Use weed-suppressing landscape fabric to cover the whole bottom of the garden box from side to side. Make sure the fabric extends right to each side of the the wooden frame.^[10]

   • For example, for a standard 4ft (1.2m) by 8ft (2.4m) garden bed, you need to get a piece of landscape fabric that is at least that big.
   • Landscape fabric usually comes in rolls that are at least 3ft (0.91m) wide, and you should be able to get the amount you need cut to size at a garden center so that you don't need to buy a whole roll.
   • This will keep weeds from sprouting up from the ground soil and into your garden.
2. 2

   Fill the bed with a 50/50 mix of planting soil and compost. Use about 3-4 2sqft (0.19m²) bags each of compost and planting soil. Pour it all into the garden bed and mix it together with a garden fork or spade.^[11]

   • You can get planting soil and compost in bags or in bulk at a garden center. Buying in bulk is usually cheaper.
3. See Also

   Vegetable Garden Layout: 7 Best Design Secrets - A Piece Of Rainbow

   3

   Rake the soil smooth and spray it with a hose to settle it. Use a rake to even out the top of the soil so it is more or less flat and either flush or just below the top edge of the garden box frame. Lightly spray the whole top layer of soil with water from your garden hose to tamp down the soil.^[12]

   • Your garden box is now ready for you to plant your vegetables!

Advertisem*nt

Community Q&A

Ask a Question

Tips

Things You’ll Need

36 votes - 97%